Cast Iron Horizontal Lift Check Valve

 The Cast Iron Horizontal Lift Check Valve has the disc is precisely guided and fits perfectly into the dashpot. Lift Check valves are suitable for installation in horizontal or vertical pipe-lines with upward flow. Flow to lift Check valves must always enter below the seat. Lift Check valves are particularly suitable for high-pressure service where velocity of flow is high. In lift Check valves, the disc is precisely guided and fits perfectly into the dashpot. Priming the pump prior to a re-start is therefore no longer necessary. The Cast Iron Horizontal Lift Check Valve is very efficient and useful.

• Product Name : Cast Iron Horizontal Lift Check Valve
• Product Standard : BS 5153
• Type of Pattern : Straight Pattern
• Product Description : Bolted Cover
• Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
• Type of seat & Disc : Renewable
• Trim : Stainless Steel (AISI 410)
• Hand wheel : Cast Iron as per IS 1367
• Stud, Nut & Washer : Carbon Steel as per IS 1367
• Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
• Pressure Rating : PN 10
• Hydraulic Test Pressure : Body 17 Kg/cm, Seat 11.3 Kg/cm
• Working Pressure : Max. BOP 8.5 Kg/cm
• Working Temperature : Max. 220C
• End Details : Flanged ends as per DIN 2532 Raised Face.